How to pack the mobile inflatable water park

With the arrival of September and the cooling weather, the children's summer vacation is also coming to an end. The annual mobile water park is also coming to a close. So, how should the equipment of the mobile water park be packed up at the end of the operating season? How should the finishing work of the mobile water park be done? It's actually not difficult to get organized!

First, let's look at the finishing work of the inflatable water slide.

Since the inflatable water slide is in contact with water for a long time, it needs to be dried in clear weather. First, move the inflatable water slide to a dry place, turn on the fan to blow the product, and it generally takes 1-2 days to dry. After drying, evenly sprinkle talcum powder on the slide to ensure that the PVC material does not directly contact each other in dry conditions. The packaging method is the same as when the product leaves the factory.

When storing the equipment, it should be placed in a cool, dry, and well-ventilated indoor area, and measures should be taken to prevent rodents and fire.

For the dismantling work of the frame swimming pool, first, all the water in the frame swimming pool needs to be drained. Before draining the water, it is important to backwash all the water circulation systems and clean the bottom. Clean the surroundings and the bottom of the swimming pool, dismantle the water circulation system, and store the water circulation accessories for future use next year!

Next, dismantle the pool frame and store the dismantled nails and foot pads (easy to lose the next year) for future use! When dismantling the frame, start from the corner, then remove the crossbar after dismantling the corner, and finally remove the U-shaped and L-shaped pipes. After dismantling, store all the frames. After cleaning the water in the pool, check for any damage at the bottom and repair it if necessary!

Then pack the pool fabric. First, use a dry cloth to wipe the water off the pool fabric, sprinkle a lot of talcum powder, fold the pool fabric neatly into a strip about 4 meters wide, then roll up the strip, wrap it in a carpet, and tie it with a rope.